Checking Windows Disk Alignment

Unfortunately, Windows doesn’t offer an easy way to check disk alignment.  We have created a script to help you analyze your servers WMI partition data for any Windows platform (physical or virtual).  You can find this script in our downloads area labeled Disk Alignment Check Utility.  The script will check all your computer’s volumes and report back if they are aligned.

1. Download the Disk Alignment check Utility from our Downloads Area
   
   
2. Extract the contents to your hard drive
   
   
3. Double click run.bat
   
   
   
   
4. The script will produce some diagnostic information on your disk.  Take note of the “Starting Offset” and “Disk Alignment” fields.
   
   

After running this utility, most will find a starting offset of 32256 (or 31.5 KB.)  This is the default offset for Windows Server 2000, 2003 and Windows XP.  But, it’s not the end of the world.  So long as the affected volume is not running RAID, although not ideal, you’ll be ok.  Having a boot volume that is not aligned is also not uncommon; just make sure that your data or I/O intensive volumes are.  But if you find your exchange or SQL volumes are not aligned, well, then you have some work ahead of you.

Comments

Add New Search

ayaz |04/12/2009 11:20:03 I have configured Raid5 array 64KB stripe size using 6 1TB enterprise class WDC drives on nVidia 3000 professional chipset (Windows 2003 x64 32GB ram, 2quad core AMD cpu) and I've used diskpart command create partition primary align=64 and format selecting 64KB allocation unit and the write speed is just 35- 40MBPS and after say 30mins it drops to 2MB (megabytes). The basic test I've done is13GB(single zip file that has single 16GB file in it ) network file copy on my raid5 array and extract it locally and it took 2hours to extract. create partition primary align=1024 gives same results create partition primary align=5120 gives same results (i read some where to align partition as 1024 * number of drives -1 for parity block so that's 1024*5 I believe) The volume is DATA volume thus I can destroy and create if you have any suggestions Reply | Quote

thirt |04/01/2010 06:07:02 Hi Ayaz - I've recently done a lot of performance/benchmarking in my lab experimenting with RAID and array controller performance. A couple pointers for you: 1. It sounds like you are assuming the speed of the network will outperform your local disk. An optimally configured 1000MB/s network will theatrically max out around 112MB/s – 120MB/s. Depending on the number of spindles and performance of your hardware etc., your disk subsystem could very easily outperform the speed of your network. Therefore, you might consider using an I/O load generation tool on your system to check its performance to remove the network as part of the equation. 2. If you insist on using the network, very you have jumbo frames enabled. You’ll get much better throughput on a network that is using jumbo frames and stand a better chance at hitting the performance limitations of your disk subsystem. I’m not sure how much improvement you should expect on a simple CIFS copy/extract, but I would image you should see something. 3. Aside from the network, the disk on the source system could also be the bottleneck. It may not be able to keep up with your RAID 5 6 spindle configuration. Again, consider using a load generation tool on the local system. Of couple of my results for comparison: 8x SAS 10K RPM in RAID 5: 249MB/s 6x SATA 7200 RPM in RAID 0: 390MB/s I was running these tests on a RHEL 5.2 system using ‘dd’ to create a 50GB file. Reply | Quote

John |01/02/2010 16:14:32 Nice article, do you know of any apps that have been written to fix the offset of a system already built? Reply | Quote

Getting error |16/04/2010 22:32:08 Hi, While running the Disk align I am getting VBScript runtime error "Overflow: '[string : "31453470720"]'. Any help would be appriciated. Thanks Harish Reply | Quote

Zeniumtech |22/04/2010 00:13:28 Regarding overflow problem. I found a fix at this site: http://blogs.msdn.com/ericlippert/archive/2004/12/01/integer-arithmetic-in-vbscript-part-one.aspx Tried out the myMod function and no more overflow on my 250 GB drive. Don't have a 1TB or 2TB drive so have not tested that large of number. Reply | Quote

harish |22/04/2010 08:27:49 Hi, Thanks a lot. It worked with MyMod. I have tested on 1 TB HDD and it works. I will try on 2TB and let you know. Thanks Harish Reply | Quote

Madhatterpa  - Please post updated vbs file for large disks |28/05/2010 22:41:03 I'm having the same issue with overflow. Can you please post or let us know how you modified the align.vbs script go use the MyMod function. Thanks Reply | Quote

Harish |19/07/2010 09:48:09 Please confirm if you still require the modified script. Thanks Harish Reply | Quote

superunknown |23/07/2010 08:48:10 Harish, can I have the modified script? Thanks.. Reply | Quote

Bob_Carswell |17/08/2010 09:38:07 This VB script is really useful but as above I'm having the same issue with overflow and would appreciate knowing how to modified the align.vbs script to use the MyMod function or have access to an already modified version. Thks Reply | Quote

pandawski |08/10/2010 10:05:39 change line 35 (the line with MOD operator), to If ( objPartition.StartingOffset - Fix( (Fix(CDbl(objPartition.StartingOffset)))/(Fix(CDbl(1024)))) = 0) Then for the vb overflow problem Reply | Quote

scrubman |13/11/2010 08:54:32 thanks Pan! It stopped the overflow but now its innacuractely saying each of my disk are not aligned. any ideas anyone? Reply | Quote

LucC |07/12/2010 08:45:56 This is a mod operation. Replace "= 0" by "mod 1024". If ( objPartition.StartingOffset - Fix( (Fix(CDbl(objPartition.StartingOffset)))/(Fix(CDbl(1024)))) mod 1024) Then Reply | Quote

Pla |10/12/2010 20:13:32 You can also check the starting offset by using msinfo32: Type "msinfo32" in windows run prompt. Go to: Components -> Storage -> Disks And look for "Partition Starting Offset" Reply | Quote

donlassini |24/02/2011 18:08:13 I'd suggest replacing line 35 with If Int(objPartition.StartingOffset / 1024) = (objPartition.StartingOffset / 1024) Then Much easier to read than (fix(cdbl(....)) And GalnoSpoke, then don't use it. After the modification, it does work for me and shows what I need to see. Reply | Quote

murphyld |18/03/2011 12:11:49 I used Diskpart from a Windows 7 recovery disk to create an aligned stripe but after I finished and went back into XP64 and ran the utility it still shows: Device ID: Disk #0, Partition #0 ============================================= Number Of Blocks: 1953523057 Block Size: 512 KB Total Volume Size: 932 GB Type: Logical Disk Manager Starting Offset: 32256 (31.5 KB) Disk Alignment: NOT ALIGNED!! Device ID: Disk #1, Partition #0 ============================================= Number Of Blocks: 1953523057 Block Size: 512 KB Total Volume Size: 932 GB Type: Logical Disk Manager Starting Offset: 32256 (31.5 KB) Disk Alignment: NOT ALIGNED!! These are the commands that I used to create the stripe in Win7 diskpart: SELECT DISK 0 CLEAN CONVERT DYNAMIC SELECT DISK 1 CLEAN CONVERT DYNAMIC CREATE VOLUME STRIPE DISKS=0,1 ALIGN=1024 ASSIGN LETTER=S FORMAT FS=NTFS LABEL="STRIPE" QUICK EXIT Diskpart only reports success with each operation so why doesn't it work when I go back into XP? Reply | Quote

roe |14/09/2011 09:21:12 A bit confused... I played around with different alignments and this script. When creating a partition with the standard 31,5KB offset the script showed "NOT ALIGNED!!" However, when creating a partition with offset 137KB (which by my calculations isnt dividable by the 128KB stripe size on my SAN) it showed "Aligned" ?? Reply | Quote

Geoff Faulkner  - Network and Systems Manager |27/01/2012 00:48:24 I have been using the GPARTED live CD to align the disk partition of a Windows system that is already built. The live CD is a linux boot CD that can move and resize partitions. In my procedures I make a copy of the virtual machine in case something goes wrong during the resize operation. I strongly suggest this, or having a recent SAN snapshot available because the operation does occassionally fail, destroying the partition. 1. Download the latest GParted live CD from http://gparted.org/ and copy to the datastore with your ISOs. 2. Shutdown the virtual machine. 3. Open the local datastore of on of the VMware hosts, and the SAN datastore where the vm resides. 4. Copy from the SAN to the local datastore. 5. Remove the virtual machine from inventory. The files reside on the SAN if we need to add the original machine back. 6. Add the virtual machine to inventory from the local datastore. 7. Edit the machine settings. Mount the GParted ISO, select connected at startup. In the Options tab choose Boot options and check "the next time the vm boots force entry into the BIOS screen" 8. Power on the VM. Select "I moved it" when promted so the NICs don't get a new MAC address. 9. In the BIOS, make sure the CD-ROM is set to first boot priority (higher than the hard disk). 10. Save and exit, booting to GParted. 11. Select the drive and partition. Click Resize/Move. Put 2MB before the partition. Select align none. Click ok, and accept the warning. GParted won't let you put a 1 here first. For some reason you have to move past 1024, then back. 12. Apply the change. Accept the warning. 13. After complete, do it again. This time change the 2 to a 1MB before the partition. This is the final align to start the partition at 1024. 14. Apply the change. Accept the warning. 15. Repeat for any other drives and parititons on the VM. 16. Shutdown 17. Dismount the ISO and reboot. 18. Windows will run a disk check on the moved parition and then reboot. 19. Windows will find new hardware. Reboot when finished. 20. Check your alignment with the align.vbs utility. 21. If everything is good, then delete the vm folder from the SAN datastore. 22. Perform a storage migration of the virtual machine from the local datastore back to the SAN. This can be done while the machine is powered on with VMware. I hope this helps! I have gone through all the machines in my inventory and performance of the machines and SAN in general seems better after aligning my disks. Geofff Reply | Quote

Geoff Faulkner  - Network Manager |27/01/2012 00:49:04 I have been using the GPARTED live CD to align the disk partition of a Windows system that is already built. The live CD is a linux boot CD that can move and resize partitions. In my procedures I make a copy of the virtual machine in case something goes wrong during the resize operation. I strongly suggest this, or having a recent SAN snapshot available because the operation does occassionally fail, destroying the partition. 1. Download the latest GParted live CD from http://gparted.org/ and copy to the datastore with your ISOs. 2. Shutdown the virtual machine. 3. Open the local datastore of on of the VMware hosts, and the SAN datastore where the vm resides. 4. Copy from the SAN to the local datastore. 5. Remove the virtual machine from inventory. The files reside on the SAN if we need to add the original machine back. 6. Add the virtual machine to inventory from the local datastore. 7. Edit the machine settings. Mount the GParted ISO, select connected at startup. In the Options tab choose Boot options and check "the next time the vm boots force entry into the BIOS screen" 8. Power on the VM. Select "I moved it" when promted so the NICs don't get a new MAC address. 9. In the BIOS, make sure the CD-ROM is set to first boot priority (higher than the hard disk). 10. Save and exit, booting to GParted. 11. Select the drive and partition. Click Resize/Move. Put 2MB before the partition. Select align none. Click ok, and accept the warning. GParted won't let you put a 1 here first. For some reason you have to move past 1024, then back. 12. Apply the change. Accept the warning. 13. After complete, do it again. This time change the 2 to a 1MB before the partition. This is the final align to start the partition at 1024. 14. Apply the change. Accept the warning. 15. Repeat for any other drives and parititons on the VM. 16. Shutdown 17. Dismount the ISO and reboot. 18. Windows will run a disk check on the moved parition and then reboot. 19. Windows will find new hardware. Reboot when finished. 20. Check your alignment with the align.vbs utility. 21. If everything is good, then delete the vm folder from the SAN datastore. 22. Perform a storage migration of the virtual machine from the local datastore back to the SAN. This can be done while the machine is powered on with VMware. I hope this helps! I have gone through all the machines in my inventory and performance of the machines and SAN in general seems better after aligning my disks. Geofff Reply | Quote

John |27/01/2012 01:08:22 I use Paragon's alignment tool, works great. http://www.paragon-software.com/home/partition-alignment/index.html Reply | Quote

Write comment
Name:
Email:	do not notifynotify
Website:
Title:
UBBCode:	-color-aquablackbluefuchsiagraygreenlimemaroonnavyolivepurpleredsilvertealwhiteyellow -size-tinysmallmediumlargehuge
	Please input the anti-spam code that you can read in the image.

!joomlacomment 4.0 Copyright (C) 2009 Compojoom.com . All rights reserved."